furnaces Thermodent Т-07.4, Т-07.5, Т-07.1















T-07.4(T-04M)

Vertical traverse of working table

T-07.5(T-05M)

Vertical traverse of heating chamber

T-07.1(T-07)

Vertical traverse of working table with a right turn

THERMODENT Т-07

Т-07.4, Т-07.5, T-07.1 are 5-th generation of a THERMODENT series Furnaces – have European conformity certificate CE. Automated vacuum furnaces for sintering metal-ceramic, zirconium and press-ceramic crowns.
High reliability (with 24 month warranty), heating element KANTHAL (Sweden) covered by quartz tube, compactness and simplicity of servicing provide high firing quality while working with various ceramic masses.
Increased number of firing programs up to 400, 200 of them are user programs with programmable parameters (up to 17 in each program)
Graphical display, numerical keypad
Convinient Graphical User Interface, which provide:
  • simultaneously displaying of all programmed parameters and expected program duration;
  • direct entering of any parameters value by means of numerical keypad;
  • continuous displaying of temperature, pressure (vacuum) in firing chamber, supply voltage, current date and timeetc;
  • - displaying of firing cycle diagram, remaining time both to the end of firing program and to the end of current stage.
Automatical control of critical parameters, displaying of warning and error messages
Operation at night mode
Improved control of the firing table lifting mechanism, protection of the motor overpower caused by incorrect denture placement or by falling of outside subjects on the firing table when the chamber is closing etc.
The furnace is protected from failures in the power supply system (short-term voltage losses do not interrupt a thermal cycle, do not cause loss of vacuum and practically do not influence quality of annealing.
Furnaces are completed with vacuum pumps VPM 01 and cellular supports with pins..
Main technical data
Characteristic Т-07.4 T-07.5 T-07.1
Temperature range, °С 1200 1200 1200
Heating rate, °С/min 2 - 200 2 - 200 2 - 200
Firing chamber dimensions, mm: diameter, height 100,60 100,60 100,60
dimensions , mm: height, depth, width 500, 315, 295 355, 410, 305 490, 310, 295
Weight (max) , kg 16 16 16
Power supply, V, Hz 220, 50 220, 50 220, 50
Power consumption without vacuum 1100 1100 1100
lifting mechanism vertical movement of the working table vertical movement of the heating chamber *vertical movement of the working table with a rotation of 90 °